|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
Your TV receives signals from the video player (VCP) like another TV station. You have to select a channel number on your TV and tune it in so that you may watch video tapes. If you connect a monitor or a TV set equipped with AUDIO and VIDEO sockets this adjustment will not be necessary, simply select the AV mode on your TV.
Tuning in a Video channel On your TV
1
Make sure that you have correctly installed your VCP as described earlier in this book. Press STANDBY/ON to turn on your VCP.
2
Insert a pre-recorded video tape into your VCP and press PLAY.
3
Store the selected TV channel on your TV. (You will need to look at the TV instruction book if you do not know how to do this.)
Changing the transmitter channel
If channel 32 is already occupied at your TV set, or if the picture is distorted, you can change the transmitter channel of the VCP. Select an undistorted channel between 32 and 40 on your TV set and store it. Use a small screwdriver to turn slowly the CHANNEL selector on the back of your VCP, until you are satisfied with the picture quality.
EW PLAY
FF
REC
REC REW FF
PLAY
CST.IN A.REPEAT LP
To watch TV programs, turn off your VCP. When your VCP is on, broadcast reception through Turn on your TV. the AERIAL socket is not possible.
STANDBY/ON STOP/ EJECT P/STILL
POWER REW PLAY STANDBY
FF
REC
CST.IN A.REPEAT LP
Select channel 32 on your TV. And then you will see the picture being played in your VCP.
RF.OUT
AUDIO OUT
VIDEO
40
32
AERIAL
CHANNEL
+
IN
DC IN 12V
6
|
|
|
> |
|
